Solar Lighting
Lithium-iron-phosphate batteries are a more long-lasting and safer variant of lithium-ion batteries that can be found in, for example, smartphones. LED solar lighting is the perfect solution in places where “pulling up” the electrical installation is impossible or too expensive. The LED solar lamp is friendly to both the environment and the home budget. Thanks to such lighting, we never have to worry about power shortages or connecting cables anymore. Meet our great products such as facade lamps, solar lamps with a motion sensor for infrared radiation or autonomous high-power solar sets. All our products are CE and RoHS certified and constructed of high quality plastic. Thanks to the fact that they are made with attention to detail, they have received the IP65 waterproof class.
A series of products from the family of solar LED lighting
SteelWall and SilverWall facade lamps are characterized by built-in motion and dusk sensors. After dark, the lamp shines with a soft decorative light throughout the night. On the other hand, when someone appears within the range of the motion sensor, more intense lighting will turn on, working continuously until you leave the range. These small-sized light sources look great on building facades and serve perfectly as illumination of building entrances or house numbers. As with any solar LED lighting, we do not need to supply power to power these lamps. We provide a 2-year warranty for facade lamps and we guarantee a return on investment after just 10 months. SteelWalle and SilverWalle have a light efficiency of 90lm / W.
SolarWhite and SolarBlack facade lamps work with a built-in motion sensor that continuously searches for heat sources moving in the monitored area. As soon as the sensor detects motion, the lamp turns on immediately and stays on as long as the source of motion is within the sensor’s range. It is recommended to mount the lamps at a height of 1.8m to 2.5m, which will allow the maximum range of the sensor (the sensor has a range of 7 meters and a detection angle of 100 °). The sensor reacts more to movements across the monitored area than to movements occurring directly under the sensor. SolarWhite and SolarBlack facade lamps have 3 modes of operation. Auto mode (normal mode using the integrated motion sensor), ON mode (continuous light, e.g. as a safety light) and OFF mode (shutdown for storage or charging).
The LED solar lamp with a motion sensor for infrared radiation is a modern lamp that, having a power of only 0.5W, is able to replace traditional 40W bulbs. The motion sensor has a detection range of up to 8 meters. Lighting time after motion detection is adjustable and ranges from 10s to 60s. The lamp operating time with a charged battery is 90 minutes. As the lamp is connected to the solar panel with a 3 meter cable, they can be mounted separately, which significantly affects the lamp’s efficiency. This type of solar LED lighting will find its application primarily in the garden, yard or as lighting for entrance doors and driveways.
The LED solar set is a professional lighting that works best as street lighting in places where it is not possible to bring power cables, e.g. bus stops outside the city. The battery capacity of 212Wh is enough for 10 hours of lamp operation and with full power. A 50W solar panel is able to charge the battery in just 6 hours with good sunlight. The set has a 3-year warranty and includes all the necessary elements for mounting on a pole. The maximum diameter of the mounting hole is 70mm.
